Best Rated threads in Land Rover 4WD vehiclesshow all threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Discovery TD5 Auto questions
Hi As the new owner of a 52 plate Discovery TD5 ES Automatic, I have a couple of questions: First, fuel consumption seems pretty poor. So far, with a fair mix of driving, it only returns about 23MPG....
29
|
17 years ago
|
29 | |
|
|
P38 Exhaust Manifold Heat Shields
HTF are you supposed to remove the heat shields off the manifolds with the engine in the car, especially the RH one? Workshop manual says "remove 8 bolts...." Yeah right !!! One is easy, the next is a...
2
|
17 years ago
|
2 | |
|
|
19J (2.5TD) - Power steering: pics please!
I'm after a favour from someone with a late 2.5TD 90 or 110 with power steering. Preferably G or H reg. if possible. I've finally got round to fitting power steering to my 1990 90, which originally...
1
|
17 years ago
|
1 | |
|
|
freelander prop shaft diagram
Hi all, Does anyone have a labelled diagram of the underside of the freelander 1.8 underside, I specifically want to identify a unit adjacent to the exhaust just behind the sump guard. It is part of...
—
|
17 years ago
|
— | |
|
|
Freelander ABS sensor
People Hi, genuine LR ABS sensors cost and arm and a leg. Does anyone have an alternative solution? Vehicle in question is a 1999 1.8 petrol engine model which has developed the notorious "three...
4
|
17 years ago
|
4 | |
|
|
Lead lined engine blanket/soundproofing?
Anybody know of someone who can supply lead-lined engine soundproofing? It's not for an engine bay, rather to soundproof a static engine in an enclosure, so i need someone who can simply supply a...
6
|
17 years ago
|
6 | |
|
|
Simbar Bull Bars
I have a 97 RR with a full width Simbar Bull Bar fitted and would like to purchase an extra bracket, does anyone know of a Simbar dealer in the UK? I have one 'steady' bracket on the drivers side but...
—
|
18 years ago
|
— | |
|
|
Rivinut
WTF is a rivinut, and how do you install them? All i want to do is fit a snorkel! Mark 9090
39
|
18 years ago
|
39 | |
|
|
1990 Range Rover Classic won't start
Can anyone help me out? My US spec Classic will not start when turning over with just the key. If I spray some starting fluid in the intake it starts and runs fine. Shut it down and it will not start...
3
|
18 years ago
|
3 | |
|
|
Battery light on with no key, off with key!?
Hi This morning my wife=E2=80=99s Disco (92 200Tdi) battery was flat as it cou= ld be. I dumped by Defender battery in to get her to work, all seemed ok. When she got to work and turned the ignition...
2
|
18 years ago
|
2 | |
|
|
Clutch slave cylinder questions (4.0 petrol/R380)
Hi All, I finally got my slave cylinder in the mail today. I rushed home to install it; it was a little different than the one that was on there (I suspect it was not correct). I bolted it up and it...
5
|
18 years ago
|
5 | |
|
|
300tdi 90 PTO Winch
Hi All, Is it possable to fit a PTO winch on to a 96 300tdi 90. I have seen some on e-bay for 90/110 landys and would like to know if they would fit my 90. I have had a look underneith but cannot see...
—
|
18 years ago
|
— | |
|
|
Stick through the radiator then "quick" fix?
A stick punctured the front radiator panel while off roading (I wasn't driving...). Antifreeze was dribbling out, so I went for a quick fix, stripping out the VVVVV-shaped foil above and below the...
4
|
19 years ago
|
4 | |
|
|
200Tdi Anti-Freeze Leak from Block ? Pointers / advice Please
Hi all, Ive just come back in from the cold after taking out my Clutch Master Cylinder... Whilst battling with the nut and stud that hold the thing in place I dropped the spanner, crawled underneath...
13
|
19 years ago
|
13 | |
|
|
V8 camshaft choices - BEWARE!
Hi all, just thought I'd post this for general perusal. Please, Please, Please - read this carefully before buying a new camshaft - from anyone! It seems to me that if you are looking for a cam for a...
14
|
19 years ago
|
14 | |
|
|
vacuum for brake servo on a 2.25 diesel
If i wanted to fit a brake servo to a 2.25 diesel powered landy where would i get a vacuum feed from? My 2.5D has a vacuum pump, but you cant fit one of them to the 2.25 as the fuel dissy is in way!...
19
|
19 years ago
|
19 | |
|
|
Discovery Sunroof
I've now run out of gaffer tape to seal my 1990 twin sunroofs. The seal itself appears to be fine but when you wind the mechanism, on the last turn it pops back up a fraction. I've taken the mech...
1
|
19 years ago
|
1 | |
|
|
Transfer case whine - 96 Auto Disco I
I believe I have a classic case of transmission whine. No sound at idle, nothing more than I would expect on a D-R clunk, no driveline lash, but when under power and driving a whining sound can be...
52
|
19 years ago
|
52 | |
|
|
Freelander transmission vibration
There is a significant vibration which appears to come from the transmission on my 1998, 70,000 mile Freelander TD. The vibration is most noticable between 1600 rpm and 1900 rpm in 4th and 5th gears...
1
|
19 years ago
|
1 | |
|
|
Thoughts on a second hand landy price?
Just been to look at a G reg Landrover 90 TD 2500. Mileage 109,000. Not mechanically minded, and have no idea on prices of second hand landrovers. Knocked about a bit , to be expected, but feels...
4
|
19 years ago
|
4 |