P0325 OBD-II code — what it means and what to check

ℹ Guidance only — not a substitute for inspection

Enter the trouble codes from your scanner to see what each one means, how urgent it is, and which checks to do first.

← Open the full OBD-II Code Interpreter

Your trouble codes

Enter the codes exactly as your scanner shows them. Separate several codes with spaces or commas.

A letter followed by four characters, for example P0301. Up to ten codes at a time.
Reset

Your codes, interpreted

What this means
⚠ Book a service. The codes you entered describe faults that get worse, or more expensive, if left.
What to doBook a workshop inspection. Normal driving is usual with these faults, but they should not be left indefinitely.

Your codes

  1. P0325 — Ignition (service soon). The knock sensor circuit on bank 1 is faulty. Without it the engine computer retards ignition timing as a precaution, which costs power and economy.

Checks to do first, in order

  1. Inspect the knock sensor connector and wiring — the sensor sits in a hot, dirty part of the engine and its wiring suffers for it.
  2. Check the sensor mounting torque; a loose sensor reports noise rather than knock.
  3. Have the sensor's output verified before replacement.

Codes this tool cannot interpret

How this result was reached
  • Interpretations cover standardised codes only, and describe what a code means rather than what is wrong with your specific vehicle.
  • A stored code identifies the circuit or system reporting a fault. It does not identify the failed part — a sensor commonly reports a problem it did not cause.
  • Reviewed by Project Owner on 2026-08-26.
  • This tool covers a reviewed subset of standardised codes. A code it does not recognise is reported as undocumented rather than guessed at.