what took me the longest was getting the right side gear out of the housing
>
and aligning the buckets with the hood.
It must have been the beverages.
Charlie
LOL ???
> 4 10mm nuts and 2
bolts and 1 connector on each bucket, had them out in
15 min..
> tapped out
the roll pin and taped the arm into original position, 3
bolts on the motor
cover
(after loosening the allen head and removing the other), off came the
>
gear cover, blew
out the mess, popped in the pellets, a little spray lith
grease on the
gear teeth and back
> together.... what took me the longest was
getting the right side gear
out of the housing
> and aligning the buckets with
the hood.
> Seriously the '94 was a piece of cake.
>
> Paul H. wrote:
>
>
RicSeyler wrote:
> A piece of cake!! Did both sides in under an hour and a
half...
It was valuable to use the Photo-instructions off the web, there > was
one allen head that had to be loosened only to get one of the
motor mount
bolts out. I would of had to scratch my head on
that one for while.
>
>
Nothing but powder inside.
Can't believe I put it off for so long. :-) LOL
>
>
> RESPECT !!! Not "undieing respect" just plain respect. I've done four
> C4s
and a Pontiac. Never come close to 1.5 hours. Congrats, Bravo
Zulu, Well Done
!
> Paul H.
>
>
> --
> Ric Seyler
> Online Racing: RicSeyler
> GPL Handicap
6.35
snipped-for-privacy@SPAMgulf.net
>
formatting link
remove
?SPAM- from email address
--------------------------------------
> "Homer no
function beer well without."
- H.J. Simpson
>