hi i just bought a 350 motor and i want to know some about it......
is a 4 bolt mains motor because i checked... heres the #'s back
flange behind head drivers side cast # 3970010 and 41 GM ...... bck
passenger side same location..# L18 8..... front flange in front of
head passenger side # V1299800 and the # i found under the valve
cast into heads is 462624.....If any body has any info i appreciate
like year.. where it was built.. and the application.. thanks alot...
On Wed, 25 Jul 2007 09:13:47 -0700, firstname.lastname@example.org wrote:
The block was made from 69 to 80 350's and was made drilled for 2 bolt
and 4 bolt mains. It was also used for 69 302 Z28 with 4 bolt caps
too. On the heads they were used 75-86 on 350/400's with 76cc chambers
and can have , 1.72/1.5, 1.94/1.5 or 2.02/1.6 valves.
Motorsforum.com is a website by car enthusiasts for car enthusiasts. It is not affiliated with any of the car or spare part manufacturers or car dealers discussed here.
All logos and trade names are the property of their respective owners.