The Leadening - Outback sound deadening done

Nov 20, 2026 Last reply: 22 hours ago 3 Replies
Jump to replies (3)

Finally wrapped up the big sound treatment on my Subaru Outback. Seats, carpet, console trim, all out. Foil-backed deadening went down across the floor pans, the transmission tunnel, and up into both footwells. Genuinely a lot of work, and I am saying that twice on purpose. Before all this, road noise at highway speeds was harsh, expecially around 80 MPH, and the noise in general was all encompassing. Now it is a diffrent animal. Sound from the areas I have not treated is much more localized instead of surrounding me. The side windows are still the worst offender, just tempered glass doing tempered glass things. Funny part is I figured the firewall was not contributing much, but now that everything else has been treated, it is clearly due for another round.



I left a bunch out of this write up, like the Helix P Six, the P One, electrical upgrades, and the Audiofrog GB10, GB25, GB60 and GB12 installs. Coming up is a 15 inch sub on a Mosconi 1|10 evo, a front sub that the existing P One will run, and I am nearly finished with differential rear fill on the D pillars off a small two channel amp. My one big takeaway for anyone considering this: just buy a luxury vehicle allready engineered for NVH.


I pulled my interior a couple summers back in my old wagon, seats out, carpet rolled up, a roll of Kilmat riding shotgun while I worked. By the third panel I was questioning my life choices, so reading about your floor and tunnel coverage made me nod along. That job always feels twice as big once you are halfway committed to it. The firewall bit tracks with what I ran into. Once the biggest noise paths get handled, whatever is left gets loud by comparison, and stuff I assumed was minor suddenly became the main event.

On the takeaway, I am with you completley. A friend's luxury SUV came from the factory quiet without a single added sheet, and that is the difference between engineering done on an assembly line with a real budget versus one person laying foil-backed mats on a garage floor in sections. Subaru interiors have a long reputation for buzzes and rattles, so you were fighting an uphill battle from the start. The material clearly helped you, but it is always catch-up against what the luxury brands build in from day one.

Curious how the rest of the build comes togather once the shell is fully sorted. Keep us posted.

I actually took your closing advice a few years back and bought something with factory NVH work, and I still ended up with the interior half apart last spring laying deadening in the doors. Funny thing is, the quiet cabin is great until you start swapping speakers, and then every panel behind them matters again. So I half smile at the recommendation, it is correct and it still does not save you from this hobby once you are in deep. Looking at your photo, the coverage across the tunnel and into the footwells looks really thorough, and the harnesses hanging loose over fresh foil bring back that exact stage of a teardown, everything sitting in limbo waiting for carpet day. The firewall part is what I would expect keeps catching people. You knock out the obvious surfaces and then a panel you never suspected turns out to be a real contributor. Are you planning to hit it while everything is already stripped, or park it for a separate session? With the seats and console trim already out, doing it now seems like the move, but I fully understand how the energy for round two is a different animal. Curious whether the localized noise change holds up for you at 80 MPH specifically, since that was your worst speed before all this.

That shot of your transmission tunnel with the crossmembers still exposed brought back some sore knees for me, that curve is the worst part to get mats to lie down flat on. Curious how the localized noise thing plays out for you over time, because on mine once the cabin got quieter I started picking up individual sounds I never noticed before, like the mirror area and the hatch. Also keen to hear how the D pillar rear fill turns out, that is a spot I never thought to run anything.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required