i have a s10 that ran good the other day till i was having to pull the wire up to give it good connection on starting it,so i found out the main power wire was loose on the starter.so i went to tighten it down,then i tightened it to tight and snap the bolt on the silinoid.so i bought a new starter from a junk yard that turns it over and starts but then dies right away.does any body know what culd be the problem,if so please let me know.
1987 chevy S-10 4x4 need some ideas
Jul 14, 2009
2 Replies
Sounds like you missed a wire connection.
Check the connection at the oil pressure sending unit. You might have knocked it off while changing the starter, and some vehicles won't run long without them.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required