>
>John Perry wrote:
>
>> I got this Chev S10 PU, 4.3L, 1994, I got it for the kid, it was not running
>> when I got it, stopped running on 495 in January and has been sitting since.
>> After doing some obvious repairs, some wires, distributor cap work, starter
>> and charging the battery, i'm at the point of further trouble shooting why
>> it don't run.
>>
>> What I have done so far - change the controller box, injectors. Checked
>> fuel for circulation, but mind you the parts came from other vehicles. I
>> cant seem to get the injectors to work, there is 12v at the connectors for
>> the injectors, they just don't want to spray the gas into the throttle body. >>
>> What I can to do to get the motor to run is - by using an atomizer, manually
>> spray gas into the throttle body, it tough to keep up with the flow to keep
>> the thing running. I did this to verify that everything else works, now
>> that I can run the engine, I need to find out how to get these injectors to
>> work again. Any one have any ideas on what to check next?
>>
>> Almost seems that there is another shutoff somewhere? Any help would be
>> appreciated. ThankYou
>
>Don't know about yours, but i think on some models if the oil pressure
>does not come up fast enough, it won't start. And i think its a different
>sender than the gauge. If you have proper fuel rail pressure, Its the computer
>telling the injectors to turn on (or not).
>
>BOB
>
>
>
>