Just had a quick Pre MOT poke with a screw driver round the RRC (D reg) and have found a large hole.....
Rear drivers side wheel arch. There are 2(I only have 1!) brackets which support the boot floor, these are fixed to the chassis rail. Well mine was, in it's place is a large hole in the chassis rail!. So my questions are:
- What are these brackets called, can't find my genuine manual at the mo to see if they are listed.
- Can they be bought as spares, if not it's off to the breakers tomorrow.
C. Any hints or tips welcome......only problem I can see is the closesness of the fuel lines/fuel tank to the area which needs welding!.
Dom J