90 Eclipse fuel pump wiring

Mitsubsi Eclipse 1990 1.8L Auto, front drive. Suspect fuel pump wiring from front of to back and bottom of car, fuel pump connector broken. Any wrirng diagram, need to know where that wire go. Any suggestion on fixing this, find the broken point and patch it or put another new wire in?

Details: Cannot not start, engine do crank Put 12 V on fuel pump test point (there is a connector behind the battery, on the firewall, take off cover, there is one plastic and one metal tap) fuel pump not spin. Put 12V directly on fuel pump, fuel pump spin. Disconnect fuel pump connector(bottom, back of car,where fuel pump is) connect voltage metter on connector. Read .01 V when start with key. key off read 0V, Put 12V on fuel pump test point at back of battery, 0V at fuel pump connector at bottom, back of car.

Before car broke down, slightly hard braking will cause engine stall.

Few years ago, before changing fuel filter, fuel pump connector was disconnected to depressure fuel line. I forgot to put the connector back in the metal clip at the fuel pump. so the break point may be close to connector.

Thanks!

Reply to
<bokoo1hk
Loading thread data ...

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.