the stepper-motor or idle control valve cost £70 try cleaning yours first. after 90k it may be gummed up a bit
Go to your Peugeot dealer.
> I don t know the name of the piece in Englich,
> in Dutch we call it STAPPENMOTOR.
>
> It can be replaced in 5 minutes.
>
> --
> groetjes,
>
>
> Tim
> "Steven Summers" schreef in bericht
> news:Hef4c.190$ snipped-for-privacy@newsfe3-win.server.ntli.net...
> > Having a few probs with my 1995 306XS lately, it doesnt seem to want to
> > idle. Shes dont 90k and ive had trouble free motoring. Symptoms ...
> > sometimes when cold and hot she wont idle, ie ill dip clutch at traffic
> > lights to slow down/stop etc and the revs with drop below 1000 pm (normal
> > idle rev) to about 600-700 and bounce back up to about 1000 and idle, > other
> > times it wont pickup and will just cut out. Then there are times where it
> > will idle nicely. These problems seemed to coincide with my last backbox
> > rusting, so i assumed it was something to do with that. However ive just > had
> > a new backbox and mid pipe fitted and still getting same probs. > >
> > Any ideas on what it could be? battery is as new and spark plugs too. > >
> >
>
>