I need help noone wants to help. Maybe someone will feel my frustration here and help. I made a big mistake. Cut the transmission wiring harness. When installing the New/used one I realized 2 of the green wires I cut are exactly the same color. Dealer wants a grip to fix it. All I really need is someone to go unscrew the harness and check the reistance between these terminals one should be like 5 ohms the other is 0. One green is on the upper right corner of the connector the other is on the other side in the middle. I need to know which one on the harness connector shows an ohm reading. *not the ohm readings on The tranny But the Harness connector itself to either the positive or negative battery terminal. I hope someone can Help. Thanks.
Do You own a 1995-1999 Saturn Sl series Automatic
Aug 01, 2004
2 Replies
So why don't you get your self a ohm-meter and test it? and Why did you cut the harness in the first place? If you want someone to come over and help you, you have to tell us where you live, at least a state, so some one can say, yeah, i live in [state] do you live near [city/town] whens the best time to come over?
good luck
Jeremiah
I checked the resistance on the wires. But I still don'tknow which wires to connect together. Because They are in fact been cut. I took it off in the first place because I am disabled on my right shoulder and thought cutting it wheer they said the new one would fit then checking it would be easier than trying to lean over.
Also I have been to junkyards trying to find an automatic in tact with all computer connections to test the ohms on and I can't find one. They are all sticks or older tran's.One had a harness on it and the engine and trans and everything were gone including the computers. I live in Fontana California. Thxs for your interest. Let me know if you can help ?
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required