can the wiring loom from a 2litre 4cam legacy turbo be put in2 a 2litre impreza not a turbo normally asperated p reg without any major wiring problems can the wiring from 2ltr legacy turbo be attached to the 2ltr p reg impreza ecu normally asperated loom and will impreza ecu accept it basically or will it fry the brain can anyone tell me a cheap place or a scrap yard where i can get subaru ecu and loom
wiring looms and ecu for legacy and impreza
Jan 25, 2007
2 Replies
[help]
The engine wiring harnesses are significantly different. If you are considering a swap, you will want (at least) the complete engine harness and ECU. Most likely you will also want the electrical section of the factory manuals for both cars as well. Best bet is if you have a reasonably complete donor car to work with. Ideally, you will also have a very solid knowledge in the workings of engine control systems, particularly turbocharged engines, as they have definite peculiarities. Not a project for the faint of heart; once you start, you're committed to seeing it thru, or basically scrapping the car . . .
If you approach them with a bit of tact, most salvage yards will be happy to work with you in securing the parts you will need. Again, I'd suggest finding a donor car to work with.
ByeBye! S.
Steve Jernigan KG0MB Laboratory Manager Microelectronics Research University of Colorado (719) 262-3101
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required