96 saturn coolant temp sensor

I was able to do it without any problems. I had to take off of the air filter and its duct work, but that was easy. The sensor now works and hopefully my drive cycle will complete so I can get my inspection :)!

FYI to all those interested. My bad temp sensor didn't cause the check engine light to come on and the only code I received was P0341(which is a cam shaft sensor error). I changed the spark plugs and cables, the crank shaft sensor, and replaced my exhaust's front pipe (leak) and catalytic converter (plugged). All of this still did not help the drive cycle (OBDII) to complete and because of this I was unable to pass the NYS's inspection. Finally Saturn technician told me based on the symptoms that the temp sensor was probably bad. Sure enough my temp gauge wasn't going above 1/4 and is should be around 1/2; also, my engine was idling a bit high. I changed the sensor and my temp gauge is climbing, the fan comes on, and the engine idle is back to normal. I should be able to pass the drive cycle and hence get my inspection.