Hi Gang, My 1990 240 turn signals stopped working after hearing loud buzzing. I assume I need to replace my flasher unit, like this one:
- posted
20 years ago
Hi Gang, My 1990 240 turn signals stopped working after hearing loud buzzing. I assume I need to replace my flasher unit, like this one:
If it's the same as an '82 240, the flasher is behind the center console on the left hand side near the heater control.
It should be behind the centre dash on RHD cars it is on the left side and if you take off the side panel you should see it. the unit is on the front clipped to the support beam. Joe
Slacken the phillips screw, upper left side of the center console. Remove the 1/4 lock fastener right below it. Pull the panel away from the center console frame and the attachment bracket at the firewall. The flasher is clipped to the frame behind the center console. You'll find a nasty spring metal "death clip" crushing the relay housing. Throw it away when you install the new relay.
Bob
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.