Hello All.... Anyone care to give me some insight as to how to retreive the trouble codes from the "check engine light". Can it be done w/o purchasing a reader. I understand some autos allow you to count blinks of the car's internal light. Thanks for your help.
Neil
To check the computer codes:
With the engine off, switch the ignition key on-off-on-off-on, leaving it "ON". Do not go to "start", just "on" during this procedure.
Watch the "Check Engine" or "Power Loss" light. It will turn on, then go off, then will begin to flash-out any trouble codes that have been stored. For instance, if it flashes:
flash flash flash
flash flash flash flash flash flash flash flash
flash flash flash flash flash flash flash flash flash flash
Then you have a 12 (one flash followed by two) a 35 (three and five) and a
55 (five and five). 55 means "end of codes" or, if by itself, "No codes stored. Check the codes and report what you find.Thanks, Dan, will do.
Neil
Hi Neil, Here is a link to a great site that has the proceedure for retreival plus all the codes and what they mean. I have a 94 Grand Caravan and a 96 Town and country and this has been invalueable:
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.