Latest threads in Ford Focus Forumshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Oil Change
52 plate Focus 1.8 TDCI estate: Probably a silly query: To change the engine oil, does the whole under-engine tray (cover) have to be removed to get at sump plug? Thanks. John.
10
|
16 years ago
|
10 | |
|
52 Plate Ford Focus - wheel upgrade
I have just bought some 17" ripspeed alloys (multifit) for my 1.6 zetec to replace the zetec 15" alloys Can I just put these straight on ? or do I need to get wheel spacers - I haven't picked them up...
—
|
16 years ago
|
— | |
|
Grinding noise from A/C compressor
I have a 2005 ZX4 XT with 11,000 miles makes a slight rumbling or a moderate grinding noise when the A/C is on, when the engine is idling. The noise comes on and off periodically, as if from the...
—
|
16 years ago
|
— | |
|
Remove cylinder barrel from focus boot latch
The boot latch on my focus (2001) fails to lock. I've got a new latch to replace the existing one but I'm not sure how to remove the cylinder barrel from the existing latch. There appears to be pin to...
—
|
16 years ago
|
— | |
|
pointer exchanging Focus battery
Hi all, after getting curious how long the first battery on my 1999 Focus would last and that it might just stop working when I at least expect it, I just had it changed. Things you need to do, in...
2
|
16 years ago
|
2 | |
|
97 ford escort A/C problem
I have the 1997 ford escort with the split port induction 2000 engine. The A/C clutch engages and disengages while A/C is on in a 3 or 4 second cycle. It's been doing this for several years and makes...
3
|
16 years ago
|
3 | |
|
changing tail light bulbs
Ccan anyone direct me as to how I go about changing the bulb in my right rear indicator? Thanks for your help. Oz
2
|
16 years ago
|
2 | |
|
2001 Focus VSS status
Mechanic could not get it out. I'm of the opinion that it must be a humdinger, because this is the first time ever that he's not been able to do something that he started.
4
|
16 years ago
|
4 | |
|
TDCi 54 plate starting problems
Hi all-have done about 40k in this car and have no real problems- however for some reason the car will start and then shake violently or just simply will not start-then I leave it for a few seconds...
14
|
16 years ago
|
14 | |
|
DLC/FCR socket location?
Not a Focus, but a 2000 Mondeo Mk2 Zetec 2.0 ;-) Where do I find the connection for a fault code reader (DLC?) and how many pins does it have? Cheers, Al.
—
|
16 years ago
|
— | |
|
Ford recommended fluids?
Ok, not a Focus, but a 2000 Mk2 Mondeo question ... Where do I get the recommended fluis easily? Specifically: Brake fluid: ESDM 6C57-A PAS fluid: WSA-M2C195-A Coolant: WSS-M97B44-D I have plenty of...
4
|
16 years ago
|
4 | |
|
Ford Focus Blaupunkt CD/MP3 Player
I want this player to switch over to European band, but don't know if serial # 3S4T-18C869-AF will change. CD Player marked as FORD MP3 US. How do I find if it will work?
—
|
16 years ago
|
— | |
|
2006 ford focus cd player sensor issues.
So, all of a sudden, the cd player in my 2006 Ford Focus just up and quit on me. I try to feed the cd to the player and it won't recognize that there is a cd there. but if I press the eject button, it...
1
|
16 years ago
|
1 | |
|
Speedo & rev counter etc go to max when engine 1st turned on
When I turn the engine on, the needles on the 4 displays (speedo, rev counter, fuel & water?) all go to their max for about 2 seconds, before returning back down to zero (or should I say their correct...
2
|
16 years ago
|
2 | |
|
Sloppy manual shifter, 2001 Ford Focus (5spd, SPI)
The shifter on my Focus is sloppy, where it does not guide you during shifting. It was challenging at first to shift from 2d to 3rd without a noticeable gate to guide me, but with practice, it's...
16
|
16 years ago
|
16 |