96 Ranger2.3 Hesitates from off idle

Aug 10, 2005 Last reply: 20 years ago 1 Replies
1996 Ranger 2.3L, 5 speed regular cab shortbed. recent (less than 5K miles) New double platinum plugs, new spark plug wires, air cleaner, PVC valve, oil change, oil filter. It ran just fine after the "tune up" for about 3K miles, then one day suddenly, it started this hesitation. Right now it has 120K+ miles. When first started, it starts fine and idles fine, But when I get it in reverse to back out of the garage it "hesitates and then revs up enough to back up. Same thing going forward and between gears. It gets less hesitant after it warms up. after about ten miles when I get off the Interstate and make my first stop, it ALMOST seems normal, only a very slight hesitation. Checked throttle position sensor with an analog ohm meter and slowly moved throttle through complete range. Ohm meter showed a nice steady movement, with initial reading of 1000 ohms at closed throttle and a 4000 ohms at WOT.

It kind of reminds me of the old carburated engines that had the squirter go bad in the carb.



Sorry about being so long with the explanation, but I tried giving the best explanation I could.



This is a great group and I've seen many good repair questions answered ..... soooooo I'm hoping you Guys and Gals can help me figure this problem out.



Thanks!


mine does that now too... I haven't figured out why yet. Started about a month ago, right as it crossed the 230,000 mile mark. I replaced the O2, idle control valve, filter and throttle position sensor. It still does it. I'm thinking it's the pricey mass air flow sensor... the computer says mine is fine with code 111. Do you have a code reader? What's yours telling you?

On Tue 09 Aug 2005 07:40:01p, Eagle Creek assaulted the computer and came up with this:

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required