Hi im about to buy a dressup kit, however they are talkin about short or tall valve cover, how do i choose, it will go on heads that were on a monte carlo 86, 305HO heads, 58cc combustion chambers, how do i differentiate them?
Thx in advance
Erix
Hi im about to buy a dressup kit, however they are talkin about short or tall valve cover, how do i choose, it will go on heads that were on a monte carlo 86, 305HO heads, 58cc combustion chambers, how do i differentiate them?
Thx in advance
Erix
Tall valve covers are generally for engines that have very high lift cams,
1.6:1 rocker arms etc. Or just for looks if you desire.Brian
When you're looking for valve covers take a look inside your old ones. See where the oil has been squirting up onto the top surface of the cover? Valve covers are partially responsible for redirecting the oil shooting out of the pushrods back onto the rocker arms, keeping the balls and valve stem tip lubricated. Tall covers are quite a bit taller than stock and may not work as well for redirecting the oil. If you have a high volume/pressure oil pump the oil coming out of the pushrods will squirt 6 feet with the covers off!...lol
Smokey Yunick told me so.
thx for the info
Eric
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.