Hello All,
Thanks for the earlier replies. Here is what we have done so far:
Replaced the three-wire 'speed-sensor' unit on the side of the Automatic Transmission.
Removed and re-soldered the connector attached to the flexible circuit card behind the dash.
Still, neither the Speedo/odo or gas gauge is working.
One observation, there are four thin leads that protrude from the un-seeable side of the flexible circuit card. Is there a component like a voltage regulator or such that is behind there? If so, is that a part that I can replace? I did re-solder the four leads.
Please help!
Best regards,
RG