Hello everyone,
Just got a 99 wrangler and was curious as to how one goes about taking the doors off? Any ideas?
Thanks
Hello everyone,
Just got a 99 wrangler and was curious as to how one goes about taking the doors off? Any ideas?
Thanks
Then really watch out for your foot when the door pops off. It is 'way' heavier than it looks and could come down fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT'sTyler Dirden wrote:
There are two nuts on each door hinge pin... I believe they're 13mm, but I could be off since it's been quite awhile since I've put the nuts back on. Take those nuts off, lift the little strappy thing off it's pin at the front, inside of each door and they'll lift right off. Might have to wiggle it back & forth a little to get them moving up. If they are full doors, they'll be a little heavy, but one person can easily lift them.
You'll probably also want to pull the fuse for the overhead light... my '01 was the #4 fuse... I assume yours is the same. The one thing to be careful of here is that you have to remember that your lights-on reminder will also not work with the #4 fuse out.
Oh... and if you're worried about scratching the nuts, you can wrap some masking tape around them before you put the wrench to them. IMHO it's not worth it... just take em off & go!
It's the #4 in the '99s, as well. And not only does it disable the "you left your headlights on" buzzer, it also disables the "you left your keys in the ignition, you idiot!" buzzer, so to the original poster - be forewarned!
One thing to watch for when you're undoing the nuts is to not scratch the body paint with the wrench. IMHO it doesn't matter if you scratch up the nuts or not - odds are you'll never put them back on. Mine are still rattling around the glove compartment. ::grin::
Tirya '99 TJ Sahara A dirty Jeep is a happy Jeep.
No ideas, just take the nuts off and then lift the doors off.
Hey a 13mm Socket/wrench will take the nuts off the door. I tried the tape idea tho, and it didn't seem to help save the paint, and just made it twice as hard to fit the 13 on and take it off the nuts
.... the nuts haven't gone back on ... been a few days ... doubt they will
I originally had a comment about how my nuts are still in the glove box, but I deleted it...
Tirya
-- TDC Inca Jeeper A dirty Jeep is a happy Jeep.
You need your nuts scratched?
Mine's a 99 and I had a hard time with the passenger door. Had to work it loose a bit, then add some lubricant and do the old open-and-close-100-times trick. Did that a few times and now both doors just slide right out. Going to keep them oiled...
Someone mentioned not scratching the paint... I used a socket and put a soft rag between the ratchet head and the side of my TJ. Actually cleaned that spot on my paint.. *laugh*
As for your nuts, I'd have to agree. Take it easy with them. Certainly don't leave them rattling somewhere! ;-)
Eric
99 TJ SE
Yeah. Only Earle was supposed to get the suggestions... ;)
Sad...oh so very sad...you poor thing.
"Where did you have them last ?" :-)
[ I hate people who ask that - if I knew where I left things, then I wouldn't have lost them, would I ?. Gets me every time. Snarl. ]Dave Milne, Scotland '99 TJ 4.0 Sahara
: On Tue, 8 Jul 2003 06:13:25 -0400, "TJim" wrote: : :I don't even remember where my nuts *are* anymore...
And, if you left your nuts somewhere, you would surely remember ...
Of course, when you emerged from the coma, you might not remember, I suppose.
Nope, its never the last place I *look*. It miraculously appears after I have bought a replacement, and it wasn't there before ..
-- Dave Milne, Scotland '99 TJ 4.0 Sahara
: > "Where did you have them last ?" :-) : >
: > [ I hate people who ask that - if I knew where I left things, then I : > wouldn't have lost them, would I ?. Gets me every time. Snarl. ] : >
: > Dave Milne, Scotland : > '99 TJ 4.0 Sahara
Have something to add? Share your thoughts — no account required.
Ask the community — no account required