flywheel for ford 2.9
Where can i get a flywheel and spigot bearing for a ford 2.9 12v, what aboutthe cosworth version?Ford in their infinite wisdom decided to make all the cosworth versionsautomatic!ThanksTimmay!
9 discussions on MotorsForum about the Ford MT75: what owners asked, what went wrong, and what fixed it.
Where can i get a flywheel and spigot bearing for a ford 2.9 12v, what aboutthe cosworth version?Ford in their infinite wisdom decided to make all the cosworth versionsautomatic!ThanksTimmay!
Hi allRe Ford Fiesta 1.4 Zetec 05 15K milesIt is impossible to engage reverse without grinding the gears, even ifI hold down the clutch for a while and then try, it still grinds.I haveeven tried engaging another gear then reverese with the...
Just been reading Ashcroft transmissions tech stuff about this gearbox, theyrecommend Dexron ATF?? Is this right, mines pissing EP90 out of every hole possible? I can tell it's EPdue to colour & cat piss smell?Is this right or...
Hello PeepsThe gearbox on our Focus makes a whiring sound with the clutch pedal up, worse when cold, gear changes are fine and smooth apart from the very ocassional crunch going into reverse.Is this likely to be low gearbox oil or has the...
Does anyone have any information regarding the gearbox fitted to the old(box-shaped) Rover 200/400 series with the pug 1.8TDi unit? I'm lead tobelieve it's the same as fitted to the Honda engined 216/416 but I'm notsure and there's no...
HiDoes anybody know if the "Honda Genuine MTF" is really the TexacoMTF-94 ?thanksPat