Problem mit Kühlmittelanzeige

Wolfgang Stark 23 years ago

Hallo,

vielleicht ist jemand hier, der diesen Text in die hier übliche Sprache übersetzt, wäre nett:

Die Kühlmittelanzeige meiner C-Klasse leuchtet auf, obwohl ausreichend Kühlmittel vorhanden ist. Am Geber kann es nicht liegen, den habe ich gegen ein Neuteil ausgetauscht. Verbinde ich die Pole der Waschwasseranzeige (!) miteinander, erlischt die Kühlmittelanzeige, auch wenn ich die Brücke am Waschwasser entferne. Beim nächsten Start des Wagens habe ich aber wieder eine leuchtende Kühlmittelanzeige.

Any hints?

mfg Wolfgang

Vote

Paul uit holland 23 years ago

Like this?

"Hello, perhaps is someone, which translates this text into the here usual language, would be nice here: The cooling agent announcement of my C-class lights up, although sufficiently cooling agent is present. Because of the giver it cannot be, that I against a new part exchanged. If I connect the poles of the washing water announcement (!), the cooling agent announcement expires, even if I remove the bridge at the washing water. With the next start of the car I have however again a bright cooling agent announcement. Any hints? mfg Wolfgang"

This is how

formatting link

translates this text.

-- w116 350SE @ 450 "Wolfgang Stark" schreef in bericht news:bf6rnk$93s$00$ snipped-for-privacy@news.t-online.com...

Vote

Dori Schmetterling 23 years ago

Well, almost... I am not sure the translator is an expert motor mechanic...

:-) DAS

Vote

miknik 23 years ago

Can you do the honours back into German again please Juergen ;-)

The coolant level sensor and washer fluid level sensor are wired in series, sounds to me like you have a dead washer level sensor. Replace that and it should be fine.

Vote

Wolfgang Stark 23 years ago

That was it! Thanx!

Wolfgang

Vote

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required