Ok, serious cheek here, I've not got a HBoL and the shops are VERY shut. I could do with releasing the center of the dash for a root around in the inside, just the siver bit where all the heater controls and the stereo are.
Could anyone give me a pointer or three, it's very nice and flush, and I can't seem to find any way in at all.
Thank you very much indeed in advance. Cat
"~.." wrote in news: snipped-for-privacy@individual.net:
This is from memory, so double-check each step...
1 Remove the cigar lighter2 Remove the lower part of the centre trim of the dash first. Lever out one side and ease it out
3 Remove the clock/temp display by unscrewing the 2 torx bolts and unplugging the module4 Take out the stereo
5 Unscrew the lower two torx bolts of the main trim assembly (where the panel you've removed was)6 Unscrew the two hex bolts behind the upper section of the panel (either side of the stereo slot)
7 Unplug the hazard and rear-window heater switches, and 12V cigar socket8 Carefully remove the facia assembly
Have something to add? Share your thoughts — no account required.
Ask the community — no account required