How do you read the codes on a 106 1.1 petrol 1999.
>
> The manual says its a small green connection! wrong all I can find is a long
> white/black one inside the car (passenger side in the UK)
>
> What is the pin out so I can read the codes? is this the right connector? >
> Thanks In Advance
>
> Marty
if you are using the diag kit from halfords then the plug is behind the ECU box behind your battery (on a 306 anyway) and there should be a plug on that somewhere down the back of it or clamped somewhere. Holding the plug so you are looking at the connectors and the metal curvy bit at the top I think its the left side you stuff your connector into. Not too sure where your ECU is on a 106!
scott