2000 Sunfire oil filter

Sep 29, 2003 11 Replies

Just in case someone didn't know.... I found that the easy way to remove the oil filter on a 2000 Sunfire



2.2L is to use the three prong oil filter wrench and stubby ratchet. Go from the top right/rear side of the engine with left hand.


-- GW - Conservational Ergonomist - note incorrect email address "Dolphins, eskimos, whatever, it's all a bunch of tree hugging hippie crap,"



- Eric Cartman


--=20

---------------------------------------

-Bon=B7ne=B7ville

-Formerly known as

-Bonnevilles R Kewl

---------------------------------------

Now what exactly is the 3 pronged oil filter wrench?

GW

why not unscrew it from underneath the old fashioend way & let oil run down your arm

========= Harryface =========

1991 Pontiac Bonneville LE ~_~_~267,300 miles_~_~_

Imagine an octopus with only three legs. Ratchet handle goes in the center and the legs tighten up on filter when turned.

Bought it at some auto parts store years ago. GW

Barry wrote:

You have to have to car up high enough to get at it. I have tried to get from the top, but that is a pain

My best way to change oil in any car:

Step 1:Go buy the applicable filter at autozone or whatever store carries a good brand. (Cost: ~$5)

Step 2: Walk over to the lube rack and bribe one of the guys to change the oil real fast during their slow time, offer lunch or money (cost: ~$5)

Step 3: Get car, drive home.

No changing spark plugs are not bad in my 99 sunfire. for the second one for the passenger side, I have to remove a bolt that gets in the way to have the socket turn freely

Sounds like what I do. My uncle is the assistant manager at Midas (he used to be the manager but it took too much time) and he'd just have them change the oil and filter on whatever car I bought it.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required