Fuse block access

Would anyone know how to get the fuse block out of the dash on a '92 Grand Am? Would like to take a good look see at the connections on the back side. Suspect a possible loose wire there. The shop manual says to take the sound insulator off and then remove screws holding the fuse block. They must have changed something after the shop manual was written. Don't see any screws and don't see anyway to get it out short of taking off the large piece of plastic surrounding the so called convenience center.

Reply to
Silver Surfer
Loading thread data ...

Gave up on trying to get the fuse block out. Looked at all the wires on the back side of it carefully through the small hole in the dash for the panel light switch. Checked resistances from the ignition switch wiring to the fuse side of the block. Everything looked good. Thanks anyway.

Reply to
Silver Surfer

Good thing you wrote back. I was going to tear mine apart just to see. Strange things do happen but I would not expect anything to go wrong at that place. Everything is crimped on, it's a reasonably dry location, no moving parts, and vibration wear should be negligible.

Reply to
=?x-user-defined?Q?=AB?= Paul =?x-user-defined?Q?=BB?=

Reply to
Silver Surfer

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.