92 9000S - Rear Brake Job - Any Advice Appreciated

I figure this one is old enough now that I can start beating and banging on it myself. Thought I would start with the rear brakes since the pads are at about 20 % The rotors are barely worn enough to feel a ridge but I will replace them anyway as the surface is badly pitted. Everything looks to be easy to access; ie ; bleeder and caliper bolts. There is a guide pin for the rim that has to be removed and supposedly there is an adjusting screw for the handbrake cable which I didn't see. Anyone know the correct size for the "metric" hex key neede to remove the caliper bolts? Any other surprises I should be aware of ?

Reply to
scorpion
Loading thread data ...

7mm. The adjusting screw, which you will need to adjust, is hidden behind a bolt at the back of the caliper (you remove the bolt to access it). The adjusting screw is IIRC 4mm allen.

Not really - pretty straightforward.

Reply to
Grunff

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.