Belt fell off!! 1996 Impreza Outback Sport

Jul 02, 2007 2 Replies
B

Hi, It looks like the accessory belt for my 1996 OBS just fell off. I know this belt goes around the power steering pump pulley, but I am not sure where else it is routed. Are there any diagrams on the web? Does anyone know what other pulleys this belt goes to? Right now the PS is a bear to turn (no kidding w/o the PS pump) and the battery and brake(?) light come on.



If anyone has an diagram of the pulley path, I would greatly appreciate it. Also, any thoughts on how something like this "just falls off"? It looks pristine and completely intact.



Bartman



Vote
Twitter Facebook LinkedIn
J

May first want to check you still have a crankshaft pulley.

Vote
Twitter Facebook LinkedIn
S

Simultaneous battery and brake lights indicate something between the alternator and battery (low output from regulator, bad connection, etc.)

Without running outside and looking, I believe the belt just runs around crankshaft, alternator, and power steering pump. Without that belt, you are running on the battery alone, so I would recommend against any extended trips until the belt situation is sorted out.

Do you have the proper belt for the application?

Perhaps the tension was incorrectly set and allowed the belt to spin off?

The alternator should be used as your tensioner, using the bolt on the front-left of the alternator that is parallel to the pulley shaft to lock/unlock the tension and the perpendicular bolt to adjust the tension. Normally there is a metal guard over top the belts. You may need to remove this guard to get the belt back on.

~Brian

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required