any tips on getting the dash front panel out to install my ipod connections? looks like it is just one panel to get at the mounting screws for the radio Has anybody done this? anybody used the Neo iOn # 10018 [MP3yourcar.com] to play the ipod on the factory set-up?
It's a 2002 Camry SE V6 with the JBL 6 Disc in dash changer with amp
thanx for the help herb
It's a breeze. First pop out the AC control knob panel. Work a flathead in around the edges, and the whole thing will come out. Unplug it, and do the same thing with the plastic trim surrounding the radio, with the clock and two vent registers. That one can be a little stiff sometimes, but the clips will release by prying the thing toward the rear of the car, not up. After that, you'll see the four 10mm bolts surrounding the radio, and its all downhill from there.
It's a breeze. First pop out the AC control knob panel. Work a flathead in around the edges, and the whole thing will come out. Unplug it, and do the same thing with the plastic trim surrounding the radio, with the clock and two vent registers. That one can be a little stiff sometimes, but the clips will release by prying the thing toward the rear of the car, not up. After that, you'll see the four 10mm bolts surrounding the radio, and its all downhill from there.
thanx it does sound easy
the dealer wants over $100 to take the radio out plug in the new unit and run one wire to the center console
a 2005 camry radio is over $800 [it plays MP3s]
so, thanks again, i will doing it myself soon herb
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.