Hello,
I have a 1994 4Runner SR5, 5spd manual, 6cyl w/ 4wd. The cruise control no longer works. When I switch on the cruise control the green "cruise" light flashes regularly but the cruise control does not engage. The car runs fine otherwise and has about 133k miles. Does anyone know what this trouble code indicates?
Thanks
Probably a leak in one of the vacuum pipes in the cruise control system.
Colin
You have to count the sequence off blinks in order to determine what has failed. There is a test mode you can enter by turning on the ignition, holding down the set/coast button while pressing the main cruise button to turn the system on. The cruise light should come on and after 3 seconds start to blink. Release the set/cruise button at this time. This puts you in test mode and pressing specific buttons, the brake, the clutch, will test different parts of the circuit. There is also a jump to put in the test port on the inner fender for additional tests. You need to look in the Toyota manual under page BE-91 for the specifics for all tests. The manual can be downloaded in PDF format online. Hope this sends you in the right direction.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required