1999 dodge durango hub bearing replacement

recently while driving i started having a loud growl from from drivers side - from experience i knew it was the wheel bearing-a trip to autozone -got hub bearing assembly with abs sensor for about $190 bucks.borrowed the axle nut tool-neat deal-no need to buy specialty tools all the time- axle nut broke loose with large pry bar,no problem-removed caliper bolts,# 7 hex- rotor was a little rusted on-came off with slight taps from rubber mallet- hub bolts were 21 mm- used short 1/2 in drive socket and extra long swivel head 1/2 in drive ratchet to break loose- hub was rusted on-sprayed some kb blaster penetrating oil and gave it a couple wacks with a BFH and it came right off.installation was super easy- calls to local repair shops were all about $450 - $500. to replace

Reply to
jtgreek
Loading thread data ...

Reply to
jtgreek via CarKB.com

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.