UK 2003 3-dr Yaris

Hi

Can anyone answer the following questions definitively?

On my 3 door the passenger seat tilts and slides in one operation. Should it return to its original position when pushed back? And should the driver's seat be capable of the same operation, ie single tilt / slide move?

I can move the rear bench seat back and fore by pulling on the bar at the front of the bench. Should I be able to move the seat back / fore using the bar at the back of the bench, the one that enables you to lift the bench and fold the seats?

On the trip computer I can get Av speed, av consumption, momentary consumption - but not the estimated remaining range. Is that normal?

Thanks in advance Mike

Reply to
AB
Loading thread data ...

I can't provide definitive answers, but I can provide answers based on the

100 or so Toyotas I am familiar with.

If the car is billed as having "memory seats" I believe that the seat will slide back to where it was set before it was pushed forward but the seat back returns to a "default" angle.

The driver's seat is not capable of the same operation.

No, the bars operate different mechanisms.

Other Toyotas I've seen have an estimated remaining range, but they were not entry level cars. Do you normally fill the tank during refueling or do you put in less than a full tank?

Reply to
Ray O

Thanks for those answers - most helpful.

To answer your question, I would usually refill to the top of the tank.

Regards Mike

Ray O wrote:

Reply to
AB

You're welcome! It sound like your Yaris's trip computer does not have a "distance to empty" function.

Reply to
Ray O

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.