Ball Joints 95 Jimmy

You can get them out with a hammer and chizzel if you work at it. Also, a pickle-fork is good to have and can force them out. Another good tool for it is a torche- burn-em. Once out the new ones do go in easy - and do change all

4 at once. Your alignment should be OK but if you have expensive tires you may want to get an alighment done. Most importantly put a jack under the lower-control arm before you break them loose. Also include tie-rod ends and a center-link. Doing it yourself you should be able to get all those parts and have a whole new-front-end for about $250 (and ~4 hours) depending on the vehicle-make and parts-store. Elliott

98 Camaro wrote: