Okay this is a follow up to an earlier post I made. Here is what I wrote in it:
hi everyone,
I have a 1989 chevrolet k 1500 4x4 truck. Had some work done on the box recently (it was removed) and when i got it back my tail lights havent been working properly (the tail light wires were frayed off about five years ago when my upper shock mount broke but were re-wired up and have worked fine up until now). I have both running lights, when i hit the brakes the driver side brake light works but the driver side reverse light comes on as well, the other side has no brake light at all. When i put it in reverse, no reverse lights work at all lol. I checked the wiring underneath. everything appears to be wired up (none loose or anything) and the ground appears to be ok. any ideas what the hell is causing this to happen??
Okay, so tonight I replaced all of the old wires with new ones, re- wired the ground and put new bulbs in the tail lights and guess what??? They still aren't working right!! As well, putting the right side signal light on makes the left side reverse light blink??? I replaced each wire at a time so no to mix them up when i was re- wiring. Really stumped right now. only thing I can think of is that the sockets in the tail light circuits must be bad and need replaced. Anyone got any ideas suggestions??
-M