Once the plastic of the lens develops what looks like scratches on the inside, is there anything that can be done besides install a new assembly? Thanks. Doug B.
- posted
17 years ago
Once the plastic of the lens develops what looks like scratches on the inside, is there anything that can be done besides install a new assembly? Thanks. Doug B.
This is caused by moisture and there is no way to fix it, unless you can see were the moisture comes in, you can try to seal around the lens, but I never saw any that did not leaked again after a while.
Sometimes you can pop the lens off the reflector and seal it back on with silicone sealer (clear "right stuff" works pretty well). This will USUALLY buy you a year or two minimum. A good idea to drill a
1/8" hole at the lowest part of the reflector before re-assembling "just in case"i have a 98 and mine has the same problem there was a guy who said he can clean it with somthing to get that out but it was like 50.00 dollars so you might be able to buy a new light cover
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.