Thermostat replacing

Mar 02, 2007 2 Replies

Hi Everyone, I read a few posts about a sticking thermostat and think I may have one as well. I am looking for it with no luck but is it possible the thermostat is on the radiator cap? I've seen pictures and it looks like the part underneath the cap which sticks in the radiator. Otherwise, I can't find it on my truck. Thanks in advance for your help. BTW, I have a 96 Explorer Eddie Bauer.



MC



"mrkcas" wrote in news:1172865735.165376.317280 @v33g2000cwv.googlegroups.com:

Find the upper radiator hose. Locate one end of said hose. Is the end of the hose attached to the radiator? If the answer is yes, locate the other end of the hose. If the answer is no, you've found the thermostat housing.

If I may add just a little more...

On my '91 and '92 with the 4.0 OHV engine there are 3 10mm bolts that hold on the thermostat housing which looks like a short, curved pipe. You need to remove the air intake duct (long plastic thing that goes to the air cleaner) and it's a whole lot easier to work if you remove the serpentine belt. You also may need to disconnect a wire that tends to get in the way. The bottom bolt is hard to get to and may require a small 10mm end wrench rather than a socket.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required