Reverse quit working in my 99 Ranger 4x4 automatic. All forward gears work fine and fluid doesn't smell burnt or discolored. What should I do next?
Transmission problem
Jun 24, 2005
Last reply: 21 years ago
9 Replies
On Fri, 24 Jun 2005 16:00:26 -0400, Shooter Rick1 rearranged some electrons to form:
Take it to a transmission shop
I planned on that, just curious...
snipped-for-privacy@webtv.net (Shooter Rick1) wrote in news:21857-42BC665A-180 @storefull-3174.bay.webtv.net:
Is the fluid hot? I had similar problem and the fluid was too hot because of a defective gasket. Fluid lost hydraulic properties until cooled down. Check to see if you have reverse after letting the truck sit and the fluid to cool down. If this is the case, do you have too much/not enough fluid in the trans? Good luck.
Yes it is likely that you either have a valve body problem or the failure of a clutch pack and time for a tranny shop unless you know how to repair them yourself.
Don't try to drive in reverse and just sell it quickly.
Nice guys, I am looking for some help and all I get is wise guys......
On Sat, 25 Jun 2005 06:54:01 -0400, Shooter Rick1 rearranged some electrons to form:
What help? Are you planning on rebuilding it yourself? You need to take it to someone who knows what they are doing.
David M (dmacchiarolo)
formatting link
T/S 53 sled351 Linux 2.4.18-14 has been up 5 days 2:18
gasket blown out under valve body
take it to an independent shop that does a lot of trucks
Well, honestly, there's no reason for you to follow the thread anymore. One person told you what to do. It's not like one of us is going to tell you there's a screw that fell out of your transmission, and all you have to do is put it back in, and reverse will be restored.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required