I want to change out the belt, but it doesn?t seem like there is much room to manuever around where the belt is. Has anyone done this and have any tips? Thanks
- posted
15 years ago
I want to change out the belt, but it doesn?t seem like there is much room to manuever around where the belt is. Has anyone done this and have any tips? Thanks
Here's what the service manual says. Don't know if there is an easier way or not. No experience on my part.
Document ID# 789505
2003 Chevrolet Cavalier--------------------------------------------------------------------------------
Drive Belt Replacement
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information. Remove the front fender liner. Refer to Front Fender Liner Replacement . Rotate the drive belt tensioner counterclockwise to release the spring tension. Remove the drive belt.
Installation Procedure
Rotate the drive belt tensioner counterclockwise to release the spring tension. Install the drive belt. Install the front fender liner. Refer to Front Fender Liner Replacement . Lower the vehicle.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.