Anyone familiar with command starts?
How would one determine model number and obtain wiring diagrams for an
"AutoCommand" remote start. It has one button remote. The printed circuit
board has 1996 stamped on it. There isn't much for info on the outside or
inside of the unit. Perhaps it's possible to provide a digital picture of
the unit if that is any help.
The unit was working fine. The power windows started giving trouble and
found a number of broken (or cut wires) in the left door jam. There was one
wire unattached, a brown with white tracer, which didn't match any in the
bundle. It was obviously not factory wire. Traced it back to the command
start which is when I realized that perhaps some of the wires in the loom
were intentionally cut for the installation of the command start. The
cut/broken factory wires are green, and two blues. I'm guessing that the two
blue wires coming from the door side were joined together and perhaps had
been spliced to the command start wire. Perhaps something to do with door
locks? Haven't traced back the two blue wires in the door yet. That will be
the next step.
The vehicle is a '95 Pontiac Transport SE.