My `79 CJ-5 resurrection is almost done, now I'm working on the soft top. I kept all the OEM hardware (door frames, windshield channel, windshield weather seal, top bows, door frame), have a nice, spiffy new Replace-A-Top for it, but what I don't have is a drilling guide for holes.
What I really need is the location for the top bow frame, say as a distance from the rear of the tub (from the lip where the snaps attach) to the front of the bracket, and then on to the big hole for the door frame.
Anyone out there with a `76 through `83 CJ-and a tape measure?
I'm tempted to just lay the top bows on the tub and line the folded front bow up with the rear of the tub, but I suspect that that won't give me the right fit. The snap holes I'll just work backward from the top with a bit of chalk (on the snaps) and some masking tape (on the tub for the chalk to stick to).
Thanks.'