Had a Tom woods SYE / driveshaft kit installed. Now 4w high doesn't engage.
4w low does. I didn't verify if neutral was where it was supposed to be. Also, the dashboard indicator is intermittant at best.
I'm hoping it's just the linkage needing adjustment, but could something be wrong internally??
Also, with a brand new rear driveshaft, and a just rebuilt (and balanced) front, I now have vibrations at 75 mph that I didn't have before :(
I haven't checked the pinion angle yet and the shims from the lift kit are still in place (I removed the 1" transfer case drop mount).
Any ideas?
TIA
Steve