Sorry if this has been asked before (have searched but can't find anything relevant) I am after some replacement alloys for a D2 and wondered if anyone knows for definite what fits without modification (other than standard ones of course).
I have seen some nice 18" rims from a new shape range rover on ebay but the buyer doesn't know if they will go on or not.
Any help appreciated.
I think they probably will, I think Andy Sargeant had a set of 19inch rims and tyres for sale. have a look back through the last few days of posts
Dave
P38 (previous shape RR) wheels will fit without modification.
L322 (current shape RR) & Disco 3 wheels will fit, but will need spigot rings for them to centre properly on the hub as the hub is slightly larger on the L322 & D3. Not sure, but depending on the alloys in question you might need new bolts as well. You can pick up the spigot rings on eBay quite cheaply.
Matt
"Matthew Maddock" wrote in message news: snipped-for-privacy@bt.com...
Many thanks Matt!!
You HAVE to fit corresponding L322 wheel nuts. Also available on ebay. £2.50 to £3.00 ish, but multiply by 20 :¬(
On or around Thu, 15 Jun 2006 08:03:25 GMT, rads enlightened us thusly:
hmmm, that's a point. discovered the other day that the recently-bought trailer axle has M12 wheel nuts which are the same as the ones on the transit, so I might order 20 of them - the transit nuts are not in the best condition.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required