Where should worn tires go, fornt or back?

Sep 26, 2007 24 Replies

That section of the Goodyear answer is NOT even about the same question ! To some of us that are old enough to know about biasply type tires do know that you did not MIX the two types of tires ! I don't think you can even buy that type of tire anymore ! If you put radial tires in the front and bias in the back, you would go for the largest spin out you could ever have the first time you made a sharp turn.

I believe the question was about "todays type of tire". Radial tires, not the mix of two very different types of tires.

"Understeer" is when the front tires DO NOT bite and the rear tires DO. ( The car will not turn enough )

"Oversteer" is when the front tires DO bite and the rear tires DO NOT. ( The ass end slides out. )

Bruce Bing '03 LS

Although that can be fun, on the track, in controlled circumstances. ;-)

Iva & Vixen

2004 Classic Red No more winkin' Miata

The big open parking lot at my last place of employment was a fun place as well. Pulling a few donuts and getting some heavy-duty throttle steer going before starting the day could help with the attitude at that one.

My tires did seem to wear out fairly fast back then. There may have been a connection.... :-)

Pat

Sure it is--you just didn't read past the second sentence. I'll quote it for you:

"When you select a pair of replacement tires in the same size and construction as those on the car, we recommend you put them on the rear axle. A single new tire should be paired on the rear axle with the tire having the most tread depth of the other three."

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required