PLEASE .. need help putting a 351w in a 67

have used the original style "tri-by" headers in that application before. The 69 style 351w oil pan is available aftermarket. you will need to change the oil pump pickup.

snipped-for-privacy@tampabay.rr.com (walt peifer) wrote in :

This is actually my son-in-laws car .. and just to complicate things I checked the inside of the door and it says its a 65A. grin ..

My googling tells me that the shock towers are closer on a 65 than a 67.

oh well .. can anyone tell me if the oil pan from the orig 289 will fit the 351w, it has front sump.

mike

True. Check with Mustangs Plus for headers to fit that application.

No, it will not. All V8 engines in early chassis need a front sump pan. In '69 the Mustang was available with a 351W. You can get a stock replacement, chrome plated, drag race, or road race pan for this - depending on how much you want to spend. Again, check with Mustangs Plus.

Many engine shops advise avoiding chrome pans if the car is driven, but OK for trailer queens, due to leakage around the seal.

snipped-for-privacy@snowcrest.net (Spike) wrote in :

wow .. ok guys .. great info ..

thanks so much

mike

Yes, just use the standard front sump oil pan available for any early mustang 289/302/351 ,,they all fit. I have one in my garage on a 289 ,,but there are thousands out there,,,in fact its the more common pan. As far as headers Dougs makes a header specifically for this swap. The problem is that its very close to the clutch z bar,,,and its hard to get in there,,I did it in a 68. The other issue is the engine mount ,,,, there is a problem with clearance on 67 engines with stock mounts ,,,,this problem is a one year only problem and from what I have heard some fit and some wont,,,, you have to find a mount that works. Steve

They all fit the chassis. But you can't use a 289/302 pan on a

The following site as lots of info on what your trying to do:

the 65a on the door tag refers to the body type in your case 2 door coupe with standard interior not the vehcile year. the first digit of the srail number tells the model year in your case the serial number should be 7c05XXXXXXX.

yes it will if it as a 69 passenger car engine, there were subtle changes in the 351 w and 351m engine in the early 70's

the fact is a 351w oil pan will NOT fit any 289,302,5.0 the 351w is wider at the pan rails & have bigger main bearings & caps. 351w block looks like a 289,302, but its different(bigger) externally.

I guess that thinking applies to chrome valve covers also? if so all those hi po 289's, 69 boss 302's, 390hp's,428cj's were trailer queens?

use RTV gasket sealer, chrome or not

I stand corrected the actually dimension on the 351w vs. the 289 302 block are as follows

snipped-for-privacy@hotmail.com (Cobra65K) wrote in :

it did turn out to be a 67. and yesterday I ordered the oil pan but .. your post reminded me that I need an oil pump pick up extention. Can I get this anywhere .. and what exactly do I ask for.

I am about ready to order the headers. here is the link to these

anyways .. thanks

mike