Hardbody Missing at Idle - Suggestions?

Hey all,

I've got a 1988 Nissan Hardbody pickup truck, 4x4, 4 cylinder 2.4L engine (2 plugs per cylinder) manual tranny. It's recently started missing at idle. It doesn't seem to miss under load, just while the truck is idling.

I tuned it up not too long ago, so it's got relatively new plugs, new plug wires, a new cap and rotor and correct valve lash, so I know it's not that.

Someone mentioned it might have something to do with the EGR valve? Can anyone shed any light on that? Any other suggestions?

Thanks in advance.

Cheers, Geoff Glave Vancouver, Canada geoff at glave dot org

Reply to
Geoff Glave
Loading thread data ...

I can't really help you out, but can recommend where you can ask. Try

formatting link
, click on "Forums", then check out "Hardbody Hangout". LOTS of Hardbody owners who are great people. Good luck!!

~Bhuvan

Reply to
Bhuvan

Distributor--Spark plug wires, tips timing. Start there and work your way out. Brandon

95 V6 4x4 X-cab
Reply to
Lord Biotree

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.