106 98 gear selection problem

May 23, 2005 2 Replies

My Peugot 106XN has an occasional gear selection problem - only happens when in heavy traffic traffic queing situations and when it happens it is impossible to select any gear. The only solution is to stop engine for a few minutes then restart. Peugot main dealer has failed to find a solution



- have checked for floor mat sticking under clutch pedal and the clutch itself. Any ideas?


Possible reason

Some Peugeots have automatic adjuster on clutch cable. Could be that it's on "next to failure" mode. Don't know if your model has or not but dealer can tell you.

If you are in heavy traffic then you are probably changing gear every minute or so (and slipping the clutch as well)

More likely to fail under thise conditions..

Probably a dragging clutch, as opposed to 'slipping'. Getting very hot in slow traffic and the driven plate sticking on the splined shaft. The cure is to put a smidgeon of grease on the shaft- should have been done on assembly, but there y'go. Could also be a bit of oil contamination on the friction linings. Maybe time for a new clutch. DaveK.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required