1. Home
  2. Saturn Cars Forum
  3. Compression For DOHC

Compression For DOHC

Hi,

I wanted to know what everyone else is getting for their compression numbers for the DOHC engine? I've got a '97 SC2 and the numbers are 141 and 142 PSI for all four cylinders.

Saturn indicates the compression should be 172-205 PSI, this brings up the next question. I live at 8,300 ft. so should I adjust my compression numbers accordingly or do compression numbers stay static no matter where you are? I read in one book to add 2 PSI for every 1,000 ft. of altitude.

Thanks,

Mike

Reply to
Mike G.
Loading thread data ...

When I had oil burning trouble, I had all cylinders but #1 at 200-205. #1 was

140.

I would think that your high altitude will alter compression. The air is less dense so in each stroke of the piston it is compressing less air.

I don't know how much per 1000' feet, but since your numbers are all the same I would say that you don't have any problems there.

Must be crazy living at 8300' !!

Reply to
BANDIT2941

formatting link
gives a table of different atmospheric densities under standard atmospheric conditions for different altitudes. I've reproduced it here, adding some columms:

Altitude (ft) Pressure (mm hg) Temp (deg F) Density (%) Compensated

141 psi Density Pressure 0 29.92 59.0 100.0 141.0 141.0 2,000 27.82 51.9 94.3 149.5 151.6 4,000 25.84 44.7 88.8 158.8 163.3 6,000 23.98 37.6 83.6 168.7 175.9 8,000 22.22 30.5 78.6 179.4 189.9 8,300 21.97 29.4 77.9 181.0 192.0 10,000 20.57 23.3 73.8 191.1 205.1 12,000 19.02 16.2 69.3 203.5 221.8 14,000 17.57 9.1 65.0 216.9 240.1 16,000 16.21 1.9 60.9 231.5 260.3

I also took the liberty of inserting an 8,300 ft point in the table by linearly interpolating the 8,000 and the 10,000 ft points.

Short Response:

Your pressures are fine.

Long Response:

You have to compensate your pressures by (Sea Level Density)/(8,300 ft density) in order to find out what your car would do at sea level. If you do that, your 141 psi at 8,300 ft translates to 181 psi at sea level. This takes into account both the different pressures and the different temperatures.

If you don't want to try to take into account different temperatures, then you merely compensate by (Sea Level Pressure)/(8,000 ft pressure). If you do that, your 141 psi at 8,300 translates to 192 psi at sea level.

(The first case is presuming that you are testing with air at 29.4 degrees and would be testing at sea level with 59 degree air. The second case is presuming that you are testing in both places at 59 degrees).

Since the range is 172 to 205 at sea level, I think you're fine.

Reply to
Kirk Kohnen

Great info! I'll take it that the numbers are good then.

Mike

atmospheric

Reply to
Mike G.

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.