Keeping Empty Fuel Tanks Dry

Nov 20, 2026 Last reply: 2 hours ago 3 Replies
Jump to replies (3)

I'm reinstalling a steel fuel tank that's had lots of rust cleaned out but it's inconvenient to fill it up with fuel completely until some more things on the car are fixed up, which at my rate of work/disaster will probably be at least a few months.



I've heard about adding alcohol to fuel tanks to absorb water. If I leave the tank with some acetone or isopropyl alcohol in there will that keep it dry enough inside to prevent rusting from humidity (assuming that still gets in somehow)? Or does that only work for water that's already in the tank when you add the alcohol, and then gets burned in the engine soon afterwards? The info I found on the web seems contradictory about this. Or would hanging packets of desiccant in the filler tube work?



I considered tank liners/sealers, but I worry they'll turn to gunk, and in spite of my best efforts I couldn't get a perfectly clean surface inside the tank for a liner epoxy to stick to anyway.


My opinion... I would not use any form of alcohol. Alcohol absorbs moisture from the air. The long term result will be water in the tank. The tank will need to breathe... they are not designed to hold a vacuum due to drops in ambient temp. But when they breathe they take in moisture which condenses into water. Try to keep the tank at a constant temp. If it were me, I would dump in or spray in a very light oil and make sure it coats the entire tank inside. Don't use diesel... algae and bacteria eat diesel and their remains leave a dense black gunk that is hard to clean out. The desiccant might be a good idea... I never thought of that. Acetone may not be a good idea... it's really volatile.

add methylated spirits when you bought petrol in the arse end of nowhere, as it was probably contaminated?

Dessicant wouldn't hurt, but I'd give it a nice coating of WD-40 or ATF inside. It will wash out nicely with gasoline and it'll provide a nice protective coating before it does.

There was a day when this was the case, but these days we have plenty of alcohol in the gasoline already. This is sometimes a problem because now if your gas is contaminated with water it'll stay in solution and not separate out.

--scott

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required