Noise when braking

Apr 28, 2008 4 Replies

I am getting a rumbling noise when I brake. Seems to be right front. I have changed tires, wheels and brake pads. No other indications are apparent. Seems to be less when below ~45mph. Car has 95,000 miles.


2000 SAAB 9-3 5 speed manual

What should I start investigating



WV


Might be bad bearings in the hub. Bad CV joints usually have a different sound and are heard when rounding corners, but dont rule anything out.

That is what I was thinking but the research I did gave little information that pointed that way. I have never had a wheel bearing go before so I am in the dark on this.

Thanks for the input and I'll pursue that avenue a little more.

WV

It hard to tell what rumbling means. Bearing is a possibility. Worn suspension bushings another. Loose bowling ball in the trunk might be another.

Was whoever did the brakes aware of the problem?

-jim

----== Posted via Pronews.Com - Unlimited-Unrestricted-Secure Usenet News==----

formatting link
The #1 Newsgroup Service in the World! >100,000Newsgroups

---= - Total Privacy via Encryption =---

Not the bowling ball, noise in the front and only when brakes are applied.

I did the pads because I thought the pads were getting worn (50,000 miles on them). When the rumble stayed the same I went Oh, Oh ....

WV

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required