I want to raise my car on one side at a time to work on the rocker panels. Can I do this safely without twisting the car frame with a
2-1/4 hydraulic jack and two metal ramps. I was thinking I might need two jacks but thought someone might have a solution. I also have lots of big lumber pieces for support if I need. Thanks in advance, K
You can just do one corner up at a time with both wheels on the other side chocked. If your frame twists apart, it's time to call the wrecker...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 'New' frame in the works for '08. Some Canadian Bush Trip and Build Photos:
Put one ramp behind the rear wheel, and one behind the front, with the wheels turned slightly. Back up onto the ramps, done!
\ \ R | | R
\ and | = wheel R = ramp
Ulf
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.